SARALWEB

Wall Mount Jobcard Attendance Device

One Time Setup

Installation

  1. Mount the device stand, at 4.2 ft from the ground.

  2. Use the screws shown in the picture below to screw the stand.

../../_images/wm1.jpg
  1. Place the device on the stand

  2. Screw the device to the stand from below, using the screws shown below

../../_images/wm2.jpg

Connecting with Wi-Fi Network

To connect with the wi-fi network, please follow the steps below:

  1. Tap on the blue bar on top of the screen with the message “Click for Home Page”

../../_images/wm3.png
  1. Select Connect to Wi-Fi from the available options on the screen

  2. Enter the Wi-Fi Name and Password at designated place

../../_images/wm4.png
  1. Tap on Submit, and wait for few seconds

  2. Confirmation message will appear on your screen

../../_images/wm5.png

Routine Operations

Changing Current Tags

The shift of an employee whose attendance is being marked is the tag. This tag is visible on the recognition screen under the blue bar and shows the event type and Shift information. You may change tag value as per requirement. To change the tag values please follow the steps below

  1. Click on “Change Current Tags” option present at the bottom of the screen

  2. Change Shift will appear on the screen

../../_images/wm6.png

Changing the Shift

  1. Click on Change Shift to change the shift

  2. A list of applicable shifts will appear on the screen. You may also search the applicable shift by typing the name of the shift in search bar.

  3. Select the respective shift . The selected shift will turn green

  4. Click on “Back”

../../_images/wm7.png

Registration

You are requested to follow the following steps for Registration

  1. Tap on the blue bar on top of the screen with the message “Click for Home Page”

../../_images/wm8.png
  1. A keyboard will appear on your screen

  2. Please enter “admin” as password in the designated box and tap on “Submit”. Please ensure to fill in the password within the time limit shown by an increasing horizontal bar

../../_images/5.png
  1. You will be guided to Home Screen with five options namely: Recognition, Registration, Change Password, Status and Connect to WiFi

../../_images/wm3.png
  1. Click on Registration

  2. You will be guided to employee registration screen. Using the keyboard, please enter the ID and name of the employee to be registered

../../_images/7.png
  1. Click on “Select” to select partner. List of partner’s will appear on your screen.

  2. Search the name of the partner you wish to select by typing the name of the partner in search box.

../../_images/18.png
  1. Tap on the name of partner to select, the selected partner name will turn green

  2. Click on “Back”, you will be guided to registration menu and an option of Designation will be listed.

  3. Click on “Select” in front of Designation to select Designation

  4. List of applicable designations will appear on your screen.

  5. Search the designation you wish to select by typing the name of the designation in search box.

../../_images/19.png
  1. Tap on the name of designation to select, the selected designation will turn green

  2. Click on Register

  3. Stand in front of the device with your face within square boundaries

  4. While the device is registering the images it is requested that you don’t move.

  5. A message confirming the registration will appear on your screen

../../_images/8.png
  1. To register more employees repeat steps 6 to 18

Error Messages

  1. Same Employee ID- The device will register one employee against one employee ID. When two employees are registered with same employee ID, an error message appears on the screen. This can be rectified by changing the employee ID at the time of registration.

../../_images/9.png

Please note that the same employee ID, for an employee of same partner cannot be used in any of Saralweb devices.

  1. Registering Registered Employee – The device will not register an already registered employee. When tried, an error message appears on the screen. This signifies that the employee is already registered with the name shown on the screen.

../../_images/10.png

Please note that an employee registered on any of the device will be considered as registered employee and will not be registered on any other Saralweb device

  1. Please Come Near The Device – When your attendance is being marked, but you are standing at a distance from the device, you will get this message on the screen. Please go near the employee to resolve the issue

../../_images/11.png
  1. Unknown Employee – When an unregistered employee stands in front of the device, the device shows an “Unknown Employee” message.

../../_images/21.png
  1. Device not synced - The device is synced frequently to push the data on cloud. If the user notices the following icon of the screen then it would mean that the device is yet not synced.

../../_images/24.png

In/ Out Time

The users can switch between IN time and OUT time by tapping on the respective button.

../../_images/12.png
../../_images/13.png

The IN time is used when marking the in time attendance and the OUT time is used when marking the out time attendance. Once selected the device would stay in the chosen state until changed.

Change Password

To change the password that the user has to insert after clicking on “Click for Home Page” , follow the following steps

  1. Tap on the blue bar on top of the screen with the message “Click for Home Page”

  2. A keyboard will appear on your screen

  3. Please enter “admin” as password in the designated box and tap on “Submit”.

  4. From the list of 5 options available on the screen, select “Change Password”

../../_images/14.png
  1. Type in current password. For the first time , it will be “admin”

  2. Type in the new password under New Password section

  3. Type in new password under “Confirm Password” section

  4. Tap on Submit

  5. User will get a notification on the screen confirming the change of password. Tap on Ok

  6. Tap on Home to return to Home Menu

After this step, the user will be able to access the Home Menu only after filing in the new password

Recognition

  1. After completion of registration process, tap on “Recognition Mode”

  2. The camera’s output will appear on the screen

  3. Stand in front of the device with face within the square boundary.

  4. Your name will appear on the screen, along with the date and time stamp, confirming the marking of attendance

../../_images/15.png

Considerations

  1. You should ensure that the employee whose attendance is being marked doesn’t has any light source behind them, i.e., the camera should not face the light source at the time of recognition.

  2. Before the first recognition of the device, you must select the shift using the “Change Current Tags”

Power Supply

The device should be powered by 220 V supply.

The device has an in-built UPS which can ensure continuous operations for upto 4 hours even in case of power failure. In case the supply outage is for longer period, kindly connect with Saralweb’s team.

Device Status

The device comes with status information, to help you with basic troubleshooting issues. To check the status follow the steps below

  1. Tap on the blue bar on top of the screen with the message “Click for Home Page”

  2. A keyboard will appear on your screen

  3. Please enter “admin” as password in the designated box and tap on “Submit”.

  4. From the list of 4 options available on the screen, select “Status”

  5. The number of items to by synced will appear on your screen.

Main Index